Jar Automatic Blow Molding Machine

Products Details

With the capacity of 800 per hour, Jar automatic blow molding machine can blow the bottles of the volume 0.2-5L, and the neck diameter from Ф28 to Ф130. 1 Features: Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn. Heating tunnel Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.Mould-closing device It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc.  Two halves of the mould are fixed on the fixed template and moving template respectively.PLC control system PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically to avoid fault expanding. Besides, there are fault reason tips on the touch screen.Blow structure Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.Air separation system the blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.Configuration: PLC: MITSUBISHI Interface & touch screen: MITSUBISHI or HITECH Solenoid:BURKERT or  EASUN                                                                               Pneumatic cylinder:FESTO or  LINGTONG Filter regulator/lubricator combination:FESTO or SHAKO Electric component: SCHNEIDER or DELIXI                                                              Sensor: OMRON or DELIXI Inverter:ABB or DELIXI or DONGYUAN   Technical Specification:

ITEM

Unit

JSD-SJ

JSD-BJ

MAX Capacity

BPH

800

800

Bottle volume

L

0.2-2.5

1-5

Neck diameter

mm

Ф28—Ф63

Ф110—Ф130

Bottle diameter

mm

Ф130

Ф160

Bottle height

mm

≦335

≦335

Moulding opening

mm

150

180

Space between cavities

mm

220

260

Clamping force

N

150

150

Length of stretching

mm

≦340

≦340

General power

KW

16.5/10

18.5/9

Temperature control section

zone

8

6

Voltage/phase/frequency

 

380V/3/50HZ

380V/3/50HZ

Main machine dimension

mm

2400(L)*1550(W)*2100(H)

2600(L)*2000(W)*2100(H)

Weight

Kg

2100

2500

Conveyor dimension

mm

2030(L)*2000(W)*2500(H)

2030(L)*2000(W)*2500(H)

Conveyor weight

Kg

280

280

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours